TeamCity 8.0 Help

Build Script Interaction with TeamCity

If TeamCity doesn't support your testing framework or build runner out of the box, you can still avail yourself of many TeamCity benefits by customizing your build scripts to interact with the TeamCity server. This makes a wide range of features available to any team regardless of their testing frameworks and runners. Some of these features include displaying real-time test results and customized statistics, changing the build status, and publishing artifacts before the build is finished. The build script interaction can be implemented by means of:

  • service messages in the build script

  • teamcity-info.xml file

servMsgs Service Messages

Service messages are used to pass commands/build information to a TeamCity server from the build script. In order to be processed by TeamCity, they should be printed into a standard output stream of the build (otherwise, if the output is not in the service message syntax, it should appear in the build log). A single service message cannot contain a newline character inside it, it cannot span across multiple lines.

Service messages support two formats:

  • Single attribute message:

    ##teamcity[<messageName> 'value']
  • Multiple attribute message:

    ##teamcity[<messageName> name1='value1' name2='value2']

Multiple attributes message can more formally be described as:

##teamcity[ messageName WSP propertyName OWSP=OWSP' value 'WSP propertyName_ID OWSP=OWSP' value '...OWSP]

where:

  • messageName is a name of the message. See below for supported messages. The message name should be a valid Java id (only alpha-numeric characters and "-", starting with an alpha character)

  • propertyName is a name of the message attribute. Should be a valid Java id.

  • value is a value of the attribute. Should be an escaped value (see below).

  • WSP is a required whitespace(s): space or tab character (\t)

  • OWSP is an optional whitespace(s)

  • ... is any number of WSP propertyName OWSP=OWSP'_value'_ blocks

For escaped values, TeamCity uses a vertical bar "|" as an escape character. In order to have certain characters properly interpreted by the TeamCity server, they must be preceded by a vertical bar. For example, the following message:

##teamcity[testStarted name='foo|'s test']

will be displayed in TeamCity as 'foo's test'. Please, refer to the table of the escaped values below.

Character

Should be escaped as

' (apostrophe)

|'

\n (line feed)

|n

\r (carriage return)

|r

\uNNNN (unicode symbol with code 0xNNNN)

|0xNNNN

| (vertical bar)

||

[ (opening bracket)

|[

] (closing bracket)

|]

Common Properties

Any "message and multiple attribute" message supports the following list of optional attributes: timestamp, flowId. In the following examples <messageName> is the name of the specific service message.

Message Creation Timestamp

##teamcity[<messageName> timestamp='timestamp' ...]

The timestamp format is yyyy-MM-dd'T'HH:mm:ss.SSSZ or yyyy-MM-dd'T'HH:mm:ss.SSS according to Java SimpleDateFormat syntax, e.g.

##teamcity[<messageName> timestamp='2008-09-03T14:02:34.487+0400' ...] ##teamcity[<messageName> timestamp='2008-09-03T14:02:34.487' ...]

For .NET DateTimeOffset, a code like this

var date = DateTimeOffset.Now; var timestamp = $"{date:yyyy-MM-dd'T'HH:mm:ss.fff}{date.Offset.Ticks:+;-;}{date.Offset:hhmm}";

will result in

##teamcity[<messageName> timestamp='2008-09-03T14:02:34.487+0400' ...]

Message FlowId

The flowId is a unique identifier of the messages flow in a build. Flow tracking is necessary, for example, to distinguish separate processes running in parallel. The identifier is a string that should be unique in the scope of individual build.

##teamcity[<messageName> flowId='flowId' ...]

Blocks of Service Messages

Blocks are used to group several messages in the build log.

Block opening:

 ##teamcity[blockOpened name='<blockName>']

Block closing:

 ##teamcity[blockClosed name='<blockName>']

reportingMessagesForBuildLogReporting Messages For Build Log

You can report messages for a build log in the following way:

##teamcity[message text='<message text>' errorDetails='<error details>' status='<status value>']

where:

  • The status attribute may take following values: NORMAL, WARNING, FAILURE, ERROR. The default value is NORMAL.

  • The errorDetails attribute is used only if status is ERROR, in other cases it is ignored.

This message fails the build in case its status is ERROR and "Fail build if an error message is logged by build runner" box is checked on the Build Failure Conditions page of a build configuration. For example:

##teamcity[message text='Exception text' errorDetails='stack trace' status='ERROR']

reportingCompilationBlocksReporting Compilation Messages

##teamcity[compilationStarted compiler='<compiler name>'] ... ##teamcity[message text='compiler output'] ##teamcity[message text='compiler output'] ##teamcity[message text='compiler error' status='ERROR'] ... ##teamcity[compilationFinished compiler='<compiler name>']

where:

  • compiler name is an arbitrary name of the compiler performing compilation, eg. javac, groovyc and so on. Currently it is used as a block name in the build log.

  • any message with status ERROR reported between compilationStarted and compilationFinished will be treated as a compilation error.

Reporting Tests

To use the TeamCity on-the-fly test reporting, a testing framework needs dedicated support for this feature to work (alternatively, XML Report Processing can be used). If TeamCity doesn't support your testing framework natively, it is possible to modify your build script to report test runs to the TeamCity server using service messages. This makes it possible to display test results in real-time, make test information available on the Working with Build Results.

Supported test service messages

Test suite messages: Test suites are used to group tests. TeamCity displays tests grouped by suites on Working with Build Results and in other places.

##teamcity[testSuiteStarted name='suiteName'] <individual test messages go here> ##teamcity[testSuiteFinished name='suiteName']

All the individual test messages are to appear between testSuiteStarted and testSuiteFinished (in that order) with the same name attributes. Suites may also be nested.

Test start/stop messages:

##teamcity[testStarted name='testName' captureStandardOutput='<true/false>'] <here go all the test service messages with the same name> ##teamcity[testFinished name='testName' duration='<test_duration_in_milliseconds>']

Indicates that the test "testName" was run. If the testFailed message is not present, the test is regarded successful.

duration (optional numeric attribute) - sets the test duration in milliseconds (should be an integer) to be reported in TeamCity UI. If omitted, the test duration will be calculated from the messages timestamps. If the timestamps are missing, from the actual time the messages were received on the server. captureStandardOutput (optional boolean attribute) - if true, all the standard output (and standard error) messages received between testStarted and testFinished messages will be considered test output. The default value is false and assumes usage of testStdOut and testStdErr service messages to report the test output.

It is highly recommended to ensure that the pair of test suite + test name is unique within the build. For advanced TeamCity test-related features to work, test names should not deviate from one build to another (a single test must be reported under the same name in every build). Include absolute paths in the reported test names is strongly discouraged.

Ignored tests:

##teamcity[testIgnored name='testName' message='ignore comment']

Indicates that the test "testName" is present but was not run (was ignored) by the testing framework. As an exception, the testIgnored message can be reported without the matching testStarted and testFinished messages.

Test output:

##teamcity[testStarted name='className.testName'] ##teamcity[testStdOut name='className.testName' out='text'] ##teamcity[testStdErr name='className.testName' out='error text'] ##teamcity[testFinished name='className.testName' duration='50']

The testStdOut and testStdOrr service messages report the test's standard and error output to be displayed in the TeamCity UI. There must be only one testStdOut and one testStdErr message per test. An alternative but a less reliable approach is to use the captureStandardOutput attribute of the testStarted message.

Test result:

##teamcity[testStarted name='MyTest.test1'] ##teamcity[testFailed name='MyTest.test1' message='failure message' details='message and stack trace'] ##teamcity[testFinished name='MyTest.test1'] ##teamcity[testStarted name='MyTest.test2'] ##teamcity[testFailed type='comparisonFailure' name='MyTest.test2' message='failure message' details='message and stack trace' expected='expected value' actual='actual value'] ##teamcity[testFinished name='MyTest.test2']

Indicates that the "testname" test failed. Only one testFailed message can appear for a given test name. message contains the textual representation of the error. details contains detailed information on the test failure, typically a message and an exception stacktrace. actual and expected attributes can only be used together with type='comparisonFailure to report comparison failure. The values will be used when opening the test in the IDE.

Here is a longer example of test reporting with service messages:

##teamcity[testSuiteStarted name='suiteName'] ##teamcity[testSuiteStarted name='nestedSuiteName'] ##teamcity[testStarted name='package_or_namespace.ClassName.TestName'] ##teamcity[testFailed name='package_or_namespace.ClassName.TestName' message='The number should be 20000' details='junit.framework.AssertionFailedError: expected:<20000> but was:<10000>|n|r at junit.framework.Assert.fail(Assert.java:47)|n|r at junit.framework.Assert.failNotEquals(Assert.java:280)|n|r...'] ##teamcity[testFinished name='package_or_namespace.ClassName.TestName'] ##teamcity[testSuiteFinished name='nestedSuiteName'] ##teamcity[testSuiteFinished name='suiteName']

Interpreting test names

The Working with Build Results allows grouping by suites, packages/namespaces, classes, and tests. Usually the attribute values are provides as they are reported by your test framework and TeamCity is able to interpret which part of the reported names is the test name, class, package as follows:

  • TeamCity takes the suite name from the corresponding suite message

  • if the reported test name starts with the suite name, it is truncated

  • the part of the test name after the last dot is treated as a test name

  • the part of the test name before the last dot is treated as a class name

  • the rest of the test name is treated as a package/namespace name

Reporting .NET Code Coverage Results

You can configure .NET coverage processing by means of service messages. To learn more, refer to Manually Configuring Reporting Coverage page.

Publishing Artifacts while the Build is Still in Progress

You can publish the build artifacts while the build is still running, immediately after the artifacts are built.

To do this, you need to output the following line:

##teamcity[publishArtifacts '<path>']

The <path> has to adhere to the same rules as the Build Artifact specification of the Build Configuration settings.

The files matching the <path> will be uploaded and visible as the artifacts of the running build. The message should be printed after all the files are ready and no file is locked for reading. Artifacts are uploaded in the background, which can take time. Please make sure the matching files are not deleted till the end of the build. (e.g. you can put them in a directory that is cleaned on the next build start, in a temp directory or use Swabra to clean them after the build.)

Artifacts that are specified in the build configuration setting will be published as usual.

Reporting Build Progress

You can use special progress messages to mark long-running parts in a build script. These messages will be shown on the projects dashboard for the corresponding build and on the Build Results page.

To log a single progress message, use:

##teamcity[progressMessage '<message>']

This progress message will be shown until another progress message occurs or until the next target starts (in case of Ant builds).

If you wish to show a progress message for a part of a build only, use:

##teamcity[progressStart '<message>'] ...some build activity... ##teamcity[progressFinish '<message>']

Reporting Build Problems

To fail a build directly from the build script, a build problem has be reported. Build problems appear on the Build Results page and also affect the build status text. To add a build problem to a build, use:

##teamcity[buildProblem description='<description>' identity='<identity>']

where:

  • description - (mandatory) a human-readable plain text describing the build problem. By default, the description appears in the build status text and in the list of build's problems. The text is limited to 4000 symbols, and will be truncated if the limit is exceeded.

  • identity - (optional) a unique problem id. Different problems must have different identity, same problems - same identity, which should not change throughout builds if the same problem occurs, e.g. the same compilation error. It should be a valid Java id up to 60 characters. If omitted, the identity is calculated based on the description text.

Reporting Build Status

TeamCity allows changing the build status text from the build script. Unlike progress messages, this change persists even after a build has finished. You can also change the build status of a failing build to success.

Prior to TeamCity 7.1, this service message could have been used for changing build status to failed. Since TeamCity 7.1, the buildProblem service message should be used for that.

To set the status and/or change the text of the build status (for example, note the number of failed tests if the test framework is not supported by TeamCity), use the buildStatus message with the following format:

##teamcity[buildStatus status='<status value>' text='{build.status.text} and some aftertext']

where:

  • status attribute is optional and may take the value SUCCESS.

  • text attribute sets the new build status text. Optionally, the text can use {build.status.text} substitution pattern which represents the status, calculated by TeamCity automatically using passed test count, compilation messages and so on.

The status set will be presented while the build is running and will also affect the final build results.

Reporting Build Number

To set a custom build number directly, specify a buildNumber message using the following format:

##teamcity[buildNumber '<new build number>']

In the <new build number> value, you can use the {build.number} substitution to use the current build number automatically generated by TeamCity. For example:

##teamcity[buildNumber '1.2.3_{build.number}-ent']

Adding or Changing a Build Parameter

By using a dedicated service message in your build script, you can dynamically update some build parameters right from a build step, so that the following build steps will run with a modified set of build parameters.

##teamcity[setParameter name='ddd' value='fff']

When specifying a build parameter's name, mind the prefix:

The changed build parameters will also be available in the following build steps and in the dependent builds as Predefined Build Parameters.

Reporting Build Statistics

In TeamCity, it is possible to configure a build script to report statistical data and then display the charts based on the data. Please refer to the Customizing Statistics Charts page for a guide to displaying the charts on the web UI. This section describes how to report the statistical data from the build script via service messages. You can publish the build statics values in two ways:

  • Using a service message in a build script directly

  • Providing data using the teamcity-info.xml file

To report build statistics using service messages:

  • Specify a 'buildStatisticValue' service message with the following format for each statistics value you want to report:

    ##teamcity[buildStatisticValue key='<valueTypeKey>' value='<value>']

The key should not be equal to any of predefined keys. The value should be a positive/negative integer.

Disabling Service Messages Processing

If you need for some reason to disable searching for service messages in the output, you can disable the service messages search with the messages:

##teamcity[enableServiceMessages] ##teamcity[disableServiceMessages]

Any messages that appear between these two are not parsed as service messages and are effectively ignored. For server-side processing of service messages, enable/disable service messages also supports the flowId attribute and will ignore only the messages with the same flowId.

Importing XML Reports

In addition to the UI Build Feature, XML reporting can be configured from within the build script with the help of the importData service message. Also, the message supports importing of the previously collected code coverage and code inspection/duplicates reports.

The service message format is:

##teamcity[importData type='typeID' path='<path to the xml file>']

where typeID can be one of the following (see also XML Report Processing):

typeID

Description

Testing frameworks

junit

JUnit Ant task XML reports

surefire

Maven Surefire XML reports

nunit

NUnit-Console XML reports

mstest

MSTest XML reports

gtest

Google Test XML reports

Code inspection

checkstyle

Checkstyle inspections XML reports

findBugs 2)

FindBugs inspections XML reports

jslint

JSLint XML reports

ReSharperInspectCode 1)

ReSharper inspectCode.exe XML reports

FxCop 1)

FxCop inspection XML reports

pmd

PMD inspections XML reports

Code duplication

pmdCpd

PMD Copy/Paste Detector (CPD) XML reports

DotNetDupFinder 1)

ReSharper dupfinder.exe XML reports

Code coverage

dotNetCoverage 1) 3)

XML reports generated by dotcover, partcover, ncover or ncover3

Notes: 1) only supports specific file in the path attribute 2) also requires the findBugsHome attribute specified pointing to the home directory of the installed FindBugs tool. 3) also requires the tool='<tool name>' service message attribute, where the <tool name> is either dotcover, partcover, ncover or ncover3.

  • If not specially noted, the report types support Ant-like wildcards in the path attribute.

  • the verbose='true' attribute will enable detailed logging into the build log.

  • the parseOutOfDate='true' attribute will process all the files matching the path. Otherwise, only those updated during the build (is determined by last modification timestamp) are processed.

  • the whenNoDataPublished=<action> (where <action> is one of the following: info (default), nothing, warning, error) will change output level if no reports matching the path specified were found.

(deprecated, use Build Failure Conditions instead) findBugs, pmd or checkstyle importData messages also take optional errorLimit and warningLimit attributes specifying errors and warnings limits, exceeding which will cause the build failure.

To initiate monitoring of several directories or parse several types of the report, send the corresponding service messages one after another.

teamcity-info.xml

It is also possible to have the build script collect information, generate an XML file called teamcity-info.xml in the root build directory. When the build finishes, this file will automatically be uploaded as a build artifact and processed by the TeamCity server.

Please note that this approach can be discontinued in the future TeamCity versions, so service messages approach is recommended instead. In case service messages does not work for you, please let us know the details and describe the case via email.

Modifying the Build Status

TeamCity has the ability to change the build status directly from the build script. You can set the status (build failure or success) and change the text of the build status (for example, note the number of failed tests if the test framework is not supported by TeamCity).

XML schema for teamcity-info.xml

It is possible to set the following information for the build:

  • Build number — Sets the new number for the finished build. You can reference the TeamCity-provided build number using {build.number}.

  • Build status — Change the build status. Supported values are "FAILURE" and "SUCCESS".

  • Status text — Modify the text of build status. You can replace the TeamCity-provided status text or add a custom part before or after the standard text. Supported action values are "append", "prepend" and "replace".

Example teamcity-info.xml file:

<build number="1.0.{build.number}"> <statusInfo status="FAILURE"> <!-- or SUCCESS --> <text action="append"> fitnesse: 45</text> <text action="append"> coverage: 54%</text> </statusInfo> </build>

Reporting Custom Statistics

It is possible to provide custom charts in TeamCity. Your build can provide data for such graphs using teamcity-info.xml file.

provideStatsUsingFileProviding data using the teamcity-info.xml file

This file should be created by the build in the root directory of the build. You can publish multiple statistics (see the details on the data format below) and create separate charts for each set of values.

The teamcity-info.xml file is to contain the code in the following format (you can combine various data in the teamcity-info.xml file):

<build> <statisticValue key="chart1Key" value="342"/> <statisticValue key="chart2Key" value="53"/> </build>

The key should not be equal to any of predefined keys. The value should be a positive integer value.

The key here relates to the key of the valueType tag used when describing the chart.

DescribeGraphsUsingFileDescribing custom charts

See Customizing Statistics Charts page for detailed description.

Last modified: 20 April 2023